Smart Home Hardware.
Locally Stocked.
Actually Tested.

The flagship Gledopto controller. Handles all five LED channel types — RGB, CCT, RGBW, RGBCCT, and single-colour — from a single unit. Zigbee PRO+ chipset with enhanced mesh range and support for OTA firmware updates. Pairs natively with Zigbee2MQTT and Philips Hue bridges. Pluggable blade fuse for field serviceability. 20A maximum output, DC 5–24V input. Recommended for permanent cove lighting, under-cabinet runs, and any installation where you want one controller that handles everything without compromise.

The compact version of the PRO series. Same 5-in-1 channel flexibility as the GL-C-201P in a significantly smaller footprint — 70 x 36 x 10mm, designed for tight enclosures, false ceiling cavities, and installations where space is the constraint. 6A total output shared across all channels, DC 5–24V input. A solid choice for bedroom and bathroom LED strip runs where you do not need 20A headroom but still want full RGBCCT control and proper Zigbee reliability.

ESP32-based controller running WLED firmware out of the box. 15A total output for long addressable LED strip runs, with built-in microphone for music-reactive effects. UART port for firmware updates and debugging without disassembly. Supports WS2812B, SK6812, WS2811, SM16703P, and most single-wire addressable protocols. DC 5–24V input, up to 800 ICs. Controlled via WLED web interface, mobile app, MQTT, or Home Assistant native integration. Fully local — no cloud account required.

ESP32-based WLED controller with built-in digital I2S microphone for music-reactive lighting effects. 10A total output for single-room and medium-length addressable strip runs. Two output channels (GPIO16 and GPIO2). Supports WS2812B, SK6812, WS2811, SM16703P, TM1814, FCOB, and most single-wire addressable protocols. DC 5–24V input, up to 800 ICs. Controlled via WLED web interface, mobile app, MQTT, or Home Assistant native integration. Fully local — no cloud account required.

ESP32-based WLED controller with 15A total output for long addressable LED strip runs. Three output channels: GPIO16 (primary), GPIO2 (secondary), and IO33 (extended GPIO for custom inputs). No built-in microphone — base variant without audio-reactive capability. Supports WS2812B, SK6812, WS2811, SM16703P, TM1814, FCOB, and most single-wire addressable protocols. DC 5–24V input, up to 800 ICs. Controlled via WLED web interface, mobile app, MQTT, or Home Assistant native integration. Fully local — no cloud account required.

Physical remote control for Gledopto WLED products. Control on/off, brightness, four scene presets, and night light mode without opening an app. Communicates over WiFi — no hub required. Up to 50 metres range. Compatible with Gledopto WLED products only — not compatible with Zigbee controllers.

Revised hardware edition of the GL-C-015WL-D. Identical performance specifications — ESP32, 15A total output, built-in microphone, 800 IC max — with a USB Type-C UART port replacing the Micro-B connector, and an orange housing. Supports WS2812B, SK6812, WS2811, SM16703P, TM1814, and most single-wire addressable protocols. DC 5–24V input. Controlled via WLED web interface, mobile app, MQTT, or Home Assistant native integration. Fully local — no cloud account required.

Mains-powered (AC 100–240V) smart outdoor spike light for permanent landscape installation. Full RGB colour plus tunable white, IP66-rated for Singapore's year-round rain and humidity. 7W, 500–550lm, 25° focused beam — suited for uplighting trees, facade lighting, and driveway uplights. Singapore 3-pin plug included. Integrates with Home Assistant via ZHA or Zigbee2MQTT, Philips Hue, Homey, SmartThings, and Tuya. Automate by sunrise and sunset, sync multiple units as a group, or control independently. A Zigbee coordinator is required.

A network-attached Zigbee and Thread coordinator for serious Home Assistant, Zigbee2MQTT and ZHA builds. Connects over 100Mbps Ethernet with PoE, so you can mount the radio high and central — away from USB noise and your rack — for a cleaner, more stable mesh. Built on the Silicon Labs EFR32MG21 radio with an ESP32 for Wi-Fi and Bluetooth. USB Passthrough Mode exposes a plugged-in USB radio (such as a Z-Wave stick) to your system over the LAN. Runs the local SLZB-OS firmware with a web UI, MQTT, OTA updates and Zigbee Hub Mode. No cloud account required. IMDA-registered equipment (ESER/26/3677), legally imported and locally stocked by a licensed Singapore dealer. Local Warranty.

The long-range member of the SLZB-06 line, built on the Texas Instruments CC2652P7 — the highest-output 2.4GHz Zigbee radio in the range — for large meshes and multi-storey homes. Network-attached over 100Mbps Ethernet with PoE, so the radio mounts central and high, away from server and USB interference. USB Passthrough Mode exposes a plugged-in USB radio (such as a Z-Wave stick) to your system over the LAN. Runs the local SLZB-OS firmware with a web UI, MQTT, OTA updates and Zigbee Hub Mode. No cloud account required. IMDA-registered equipment (ESER/26/3677), legally imported and locally stocked by a licensed Singapore dealer. Local Warranty.

The flagship coordinator: two independent 2.4GHz radios in one network-attached unit. Run a Zigbee coordinator and a Thread border router simultaneously, or two separate Zigbee networks, each on its own antenna. Radio one is the TI CC2674P10, radio two the Silicon Labs EFR32MG24, with an ESP32 for Wi-Fi and Bluetooth. Connects over 100Mbps Ethernet with PoE 48 support. USB Passthrough Mode exposes a plugged-in USB radio over the LAN. Runs the local SLZB-OS firmware with a web UI, MQTT, OTA updates and Zigbee Hub Mode. No cloud account required. IMDA-registered equipment (ESER/26/3682), legally imported and locally stocked by a licensed Singapore dealer. Local Warranty.