GL-C-002P
Gledopto GL-C-002P Zigbee PRO 5-in-1 Mini LED Controller
SG Seller — ships same/next day — Local Warranty
Buy on Shopee →Overview
The compact version of the Gledopto PRO series. Same 5-in-1 channel flexibility as the GL-C-201P — RGBCCT, RGBW, RGB, CCT, and single-colour dimmer — in a body smaller than a credit card at 70 × 36 × 10mm and 23.5g. Designed for tight enclosures, false ceiling cavities, and under-cabinet installations where a standard-size controller does not fit.
This is the 6A/channel upgraded variant. Total device output is 6A shared across all active channels. For installations requiring more than 6A total, see the GL-C-201P (20A).
Technical Specifications
| Model | GL-C-002P PRO Series |
|---|---|
| Protocol | Zigbee 3.0 + 2.4GHz RF |
| Input Voltage | DC 5V – 24V (constant voltage) |
| Total Output Current | 6A max (shared across all channels) |
| Per-Channel Output | 3A max |
| Max Power | 72W at 12V / 144W at 24V |
| LED Strip Modes | RGBCCT (5ch) · RGBW (4ch) · RGB (3ch) · CCT (2ch) · Dimmer (1ch) |
| PWM Frequency | 600 / 800 / 1000 / 2000 / 4000 / 8000Hz (selectable) |
| Zigbee Range | 30m (also acts as Zigbee router when powered) |
| Standby Power | <1W |
| Dimensions | 70 × 36 × 10mm / 23.5g |
| IP Rating | IP20 (indoor) |
| Operating Temp | −20°C to +45°C |
| Safety Mark | 211814 |
Home Assistant and Zigbee2MQTT Compatibility
The GL-C-002P is natively supported in Zigbee2MQTT and ZHA with no custom converter required. It appears in the Zigbee2MQTT device database under Gledopto and pairs automatically on any Zigbee 3.0 coordinator.
In Home Assistant, the controller exposes as a standard light entity with full colour, colour temperature, and brightness control — identical to the larger GL-C-201P.
Compatible hubs and ecosystems: Home Assistant (Zigbee2MQTT / ZHA) · Philips Hue Bridge · Apple Home (via Matter/Zigbee bridge) · Tuya SmartLife · Amazon Alexa · Google Home · Samsung SmartThings · Homey
Wiring — RGBCCT LED Strip (5-channel)
For a standard 5-pin RGBCCT strip, connect to the terminal block as follows:
| Terminal | Connect to |
|---|---|
| V+ (input) | PSU positive (5V, 12V, or 24V DC) |
| V− (input) | PSU negative / ground |
| R | Strip red wire |
| G | Strip green wire |
| B | Strip blue wire |
| W1 / CW | Strip cool white wire |
| W2 / WW | Strip warm white wire |
Maximum total load is 6A across all channels simultaneously. For a 24V strip at 14.4W/m, this gives approximately 10m maximum. Use a constant-voltage PSU rated at least 20% above your total strip load. Power supply sold separately.
FAQ
What is the difference between GL-C-002P and GL-C-201P?
Size and current rating. The GL-C-002P is 70 × 36 × 10mm and 6A total — suited for bedroom and bathroom runs where space is limited. The GL-C-201P is 108 × 45 × 18mm and 20A — suited for long cove runs and multi-zone installations. Both support the same five LED strip modes and Zigbee ecosystem.
Does this require a hub?
Yes — a Zigbee 3.0 coordinator is required for smart control. For hub-free physical control, pair a Gledopto 2.4GHz RF remote (sold separately) directly to the controller.
What LED strip types are supported?
Any constant-voltage strip at DC 5V–24V: RGBCCT (5ch), RGBW (4ch), RGB (3ch), CCT dual-white (2ch), or single-colour dimmer (1ch). Switch modes via short-press of the Opt button.
What does "6A/channel upgraded variant" mean?
Earlier GL-C-002P units were rated 3A per channel. The current stock is the upgraded variant rated 6A per channel — though the device's total shared output remains 6A. This means a single-channel (dimmer or CCT) installation can draw the full 6A on that channel rather than being capped at 3A.