GL-C-201P
Gledopto GL-C-201P Zigbee PRO+ 5-in-1 LED Controller
SG Seller — ships same/next day — Local Warranty
Buy on Shopee →Overview
The flagship Gledopto controller. Handles all five LED channel types — RGB, CCT, RGBW, RGBCCT, and single-colour dimmer — from a single unit. One-button mode switching changes LED type without rewiring. The Zigbee PRO+ chipset delivers enhanced mesh range and OTA firmware updates delivered over your existing Zigbee hub.
Pluggable blade fuse for field serviceability — replace the fuse, not the controller. Recommended for permanent cove lighting, under-cabinet LED runs, and any installation where you need one controller to handle every strip type without compromise.
Technical Specifications
| Model | GL-C-201P PRO+ Series |
|---|---|
| Protocol | Zigbee 3.0 |
| Input Voltage | DC 12V – 24V (constant voltage) |
| Total Output Current | 20A max |
| Per-Channel Output | 15A max |
| LED Strip Modes | RGBCCT (5ch) · RGBW (4ch) · RGB (3ch) · CCT (2ch) · Dimmer (1ch) |
| PWM Frequency | 600 / 800 / 1000 / 2000 / 4000 / 8000Hz (selectable) |
| Firmware | Gledopto OTA — updates via Zigbee hub, no physical access needed |
| Standby Power | <1W |
| Dimensions | 108 × 45 × 18mm |
| IP Rating | IP20 (indoor) |
| Operating Temp | −20°C to +45°C |
| Housing | Flame-retardant PC (UL94 V0) |
| Safety Mark | 211814 |
Home Assistant and Zigbee2MQTT Compatibility
The GL-C-201P is natively supported in Zigbee2MQTT and ZHA (Zigbee Home Automation) with no custom converter or configuration required. It appears in the Zigbee2MQTT device database under Gledopto and pairs automatically on any Zigbee 3.0 coordinator.
In Home Assistant, the controller exposes as a standard light entity with full colour, colour temperature, and brightness control. OTA firmware updates are available directly from the Zigbee2MQTT UI — no physical access to the controller required.
Compatible hubs and ecosystems: Home Assistant (Zigbee2MQTT / ZHA) · Philips Hue Bridge · Apple Home (via Matter/Zigbee bridge) · Tuya SmartLife · Amazon Alexa (Zigbee hub required)
A Zigbee 3.0 coordinator is required. If you need one, SMLIGHT SLZB-06M (LAN/USB) and SLZB-06P7 (PoE) will be stocked locally — join the waitlist via the contact form.
Wiring — RGBCCT LED Strip (5-channel)
The terminal block provides one power input pair (V+/V−) and five output channels. For a standard 5-pin RGBCCT LED strip:
| Terminal | Connect to |
|---|---|
| V+ (input) | PSU positive (12V or 24V DC) |
| V− (input) | PSU negative / ground |
| R | Strip red wire |
| G | Strip green wire |
| B | Strip blue wire |
| W1 / CW | Strip cool white wire |
| W2 / WW | Strip warm white wire |
Use a 12V or 24V DC constant-voltage PSU rated at least 20% above your total strip load. Do not exceed 20A total or 15A on any single channel. Power supply sold separately.
FAQ
Does this require a hub?
Yes — a Zigbee 3.0 coordinator is required for smart control (e.g. Philips Hue Bridge, SMLIGHT SLZB-06M, SONOFF Zigbee Dongle). For hub-free physical control, pair a Gledopto 2.4GHz RF remote (sold separately) directly to the controller.
What LED strip types are supported?
Any constant-voltage 12V–24V DC strip: RGBCCT (5ch), RGBW (4ch), RGB (3ch), CCT dual-white (2ch), or single-colour dimmer (1ch). Switch modes via the onboard button — no rewiring required.
What is the PWM frequency adjustment for?
It eliminates coil whine from LED strip drivers and camera flicker in videography setups. Default is 1000Hz. Short-press Reset to cycle: 600 / 800 / 1000 / 2000 / 4000 / 8000Hz.
How long a strip can I connect?
Depends on strip wattage per metre and PSU voltage. At 24V with a 14.4W/m RGBCCT strip: 20A ÷ (14.4W ÷ 24V) ≈ 33m maximum before derating. Always apply 20% thermal headroom. For runs over 5m, inject power at both ends.